What Can You Do With an Old Lawn Mower? (12 Ideas!)

Contrary to what you may surmise, there are a great many things that can be done with an old lawnmower. Some of them can be listed below in the following manner:

  • Give it away to a friend or family member
  • Give it away to a neighbor
  • Give it away to a charitable organization
  • Sell it on an online service such as E-bay
  • Sell it for parts
  • Get rid of it at the city dump
  • Sell it to a junkyard
  • Use its engine for a go-kart
  • Use its engine to power a bike
  • Use its engine to power a generator
  • Use some of its parts to provide parts for other devices
  • Sell the body for scrap metal

Can You Use a Lawn Mower Engine for a Go Kart?

Most 5 to 7 horsepower lawn mower engines can be used to power a standard go-kart.

Can You Use a Lawn Mower Engine for a Generator?

A lawn mower engine can be used as a source of auxiliary power for your home or commercial location.

Can You Use a Lawn Mower Engine to Power a Bike?

You can install a lawn mower engine in a bike if you vertically mount the engine. To do this, you will need to modify the oil slinger, carburetor, fuel tank, and several other items. Check online for details.

Does Home Depot Recycle Old Lawn Mowers?

Many Home Depot locations have special bins located at the back or sides of their stores. You can use these bins to dispose of scrap metal, including your old lawn mower. Make sure that the gas in the mower is completely removed before you make the drop-off.

How Do I Throw Away a Lawn Mower?

The best way to get rid of an old lawn mower is to first remove all of the gas. Then contact your local waste hauler to schedule a special bulk item pick up.

Are Old Lawn Mowers Worth Anything?

There are several ways to find out if your old lawn mower is worth anything. You can check the web to see current prices for parts. There are a few sites that let you sell or trade your lawn mower. There are also several centers around the country where you can turn in your old mower for scrap metal.

Are Lawn Mowers Good for Scrap Metal?

Lawn mowers can give you a small amount of return on your initial investment. The main way to receive this return is to hand them in for scrap metal. Keep in mind that the return will not be very great. You can maybe expect about $3 at maximum for a push mower and up to $18 for a riding mower.

How Much Is a Push Lawn Mower Worth in Scrap?

The average price for a ton of steel is about $60. This means that your push lawn mower will probably be worth about $1.50 to $2.70 in total. Keep in mind that this total price will depend on two main conditions. These will be the current going rate for metal scrap as well as the total weight of your mower.

How Much Is a Riding Lawn Mower Worth in Scrap?

The average amount of money that you can get by turning in your riding lawn mower for scrap will currently total around $10.50 to $18.00. The total amount that you will receive for scrapping your riding lawn mower will naturally depend on current scrap metal market prices as well as the total weight of the unit.

How Do You Get Old Gas Out of a Lawn Mower?

Here are the steps that you can take to get excess gas from your lawn mower. If your mower comes with a fuel connector, you can make use of the following method as described below:

  1. Put the lawn mower on a flat, raised surface so that you can drain the gas out of it
  2. Disconnect the spark plug by pulling the wire from the cap
  3. Set a plastic container under the tank to catch the gas
  4. Disconnect the fuel line from the carburetor and let the gas drain into the container

If your lawn mower does not come with a fuel connector, you will need to use an alternate method. The steps for removing old gas from your mower can be described below in the following manner:

  1. Place the clear end of a siphon in a jug
  2. Insert the brass end of the siphon into your mower
  3. Shake the siphon in a vigorous fashion, up and down and sideways as needed
  4. Repeat this action until the gas is out of the mower
  5. Take a rag and wipe up the remaining gas
  6. Add a tiny bit of fresh gas into the tank so that it mixes with whatever is left of the old gas
  7. Drain the mixture into the plastic container
  8. Allow the tank to dry for a couple of minutes
  9. Check the air filter to make sure it is not clogged
  10. Reattach the fuel line and spark plug wire
  11. Check to see that the oil reservoir for your mower is full
  12. Start the mower and let it run until it quits. This will burn off all of the excess gas