Does Wet Grass Dull Mower Blades? (Solved & Explained!)

Does wet grass dull mower blades? You should always avoid cutting the grass when it’s wet because there is a chance that the wet grass could dull the mower blades. If you do cut the grass while it’s wet, you should clean the blades immediately after use to keep them sharp. Keep reading to find out more about how to avoid making your lawn mower blades dull.

Why should you avoid cutting the grass while it’s wet?

You should always avoid cutting the grass while it’s wet because you could dull the blades, among other problems. Wet grass clippings often shoot out of the lawn mower in clumps, and these clumps are known for doing damage to the lawn because they smother the grass blades. There is also a good chance that wet grass could clog the lawn mower.

Why does wet grass affect the mower blades?

Wet grass is thicker and more difficult for the mower blades to cut through. The wet clippings are also more likely to stick to the lawn mower blades. When this happens, the mower blades will have difficulties cutting the rest of the lawn. When you finish and the lawn dries, it’s highly likely that it will be very unevenly cut. 

How often should the mower blades be sharpened? 

It’s important to sharpen your lawn mower blades regularly for an efficient and even cut every time. To keep your blades in good condition, it is recommended to sharpen them after every 20 to 25 hours of use, which is usually twice each season. Keeping up with this routine will keep your mower in good shape all season, even if you do run it over wet grass occasionally.

Why do you need to keep the mower blades sharp all season?

Keeping your lawn mower blades sharp is important for a good-looking lawn. If you try to cut the grass with dull mower blades it may not be able to cut through the blades, especially if the grass is thick. Another problem you may encounter is that the mower blades pull the grass blades up by the root, which will cause ugly patches. 

Can wet grass start to rust mower blades?

Another problem you need to be aware of with wet grass is that it could cause the mower blades to start rusting. This happens when wet grass sticks to the blades and doesn’t get cleared off. As the wet clippings sit on the blades, the moisture begins to create rust. This is why it’s important to make sure you clean off your mower blades after use.

Is it dangerous to cut wet grass?

Wet grass clippings aren’t good for your lawn mower, and they could also present a danger to you when you are cutting the grass. This is because they are slippery and there is a chance that you could slip and fall while cutting wet or dewy grass. To avoid an injury, always wait until the grass is dry to trim it. 

Is it okay to cut grass with morning dew on it?

It is best to avoid cutting the grass when it is covered in morning dew. While it may seem ideal to cut the grass before the sun heats things up, but the dew could cause problems for your blades and how it cuts the grass. The morning dew does cause the grass to clump when it’s being cut, which leads to a lot of problems. 

When is the best time of day to cut the grass?

You may notice that your grass is dewy first thing in the morning, so it’s best to avoid cutting the grass too early. Most professional lawn companies will suggest cutting the grass between 8 am and 10 am. This is because it gives the dew a chance to dry off and enough time to recover before the evening comes.

When is it acceptable to cut wet grass?

There are some circumstances where a homeowner may have no choice but to cut wet grass. If you live in an area where there is a lot of moisture and the grass is consistently soggy, then you should attempt to cut it before it gets too wet. Longer wet grass blades always create a larger mess. Once the grass reaches 3.5 inches, you should make arrangements to cut it.

Why is cutting the grass while it’s wet bad for the grass?

Wet grass often sticks to the ground and is more difficult to cute. Your lawn will always be healthier if you cut it when the grass is dry. The blades that do get cut will be ragged, which puts them at risk of fungal infestations and mold. It’s also easier to get bare patches in the lawn because wet soil is loose, making it easier for blades to be pulled.

Should the grass be cut before or after the rain?

It’s a much better idea to cut the grass before the rain comes. If you wait until after the rain to cut the grass, you may be waiting longer than anticipated. This is because it’s important to let the grass dry for at least a day after it rains so the wet grass blades don’t affect the mower blades. Mowing before the rain could save you trouble later on.

How can I tell if the mower blades are dull?

If you mow wet grass often, there is a chance the mower blades will start to dull out faster. It’s very easy to tell if your mower blades are dull by taking a look at how well they cut the grass. If the grass is uneven or your notice frayed, brown, or torn edges, then it’s a sign that your blades are dull.

Why should you avoid making mower blades too sharp?

If you sharpen your mower blades too much you won’t be doing your mower any favors. This is because blades that are too sharp are more likely to dull quicker, especially when they come into contact with wet grass. Blades should be kept sharp, but never too sharp to touch.